Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Nikro Air Duct Cleaning in Katy: What to Know First
CleanRun provides independent Nikro air duct cleaning in Katy, TX, with written pricing delivered before any work starts and a documented photo record of every duct run. Most residential Nikro systems we see in Katy are cleaned and scoped within a single scheduled visit. We don’t use per-vent teaser rates or coupon pricing - the price we write is the price you pay, backed by our 365-Day Done Right Promise.
This page is for Katy homeowners who own Nikro air duct cleaning equipment or have Nikro-integrated HVAC systems and need service from a technician who knows the difference between a Nikro 862174 and a generic adapter. If you’re in Cinco Ranch, Old Katy, or the newer builds near Elyson and your Nikro system needs cleaning, repair, or a video inspection, call us at (346) 666-7165. Estimates are free, and we put our number next to any competitor’s written quote.
How Nikro Products Fail - and How We Fix Them
- Nikro 862174 Portable Air Duct Cleaner: The flexible drive cable on this unit binds in tight Katy attic spaces where roof pitch and summer heat warp the cable housing. We see this most in ranch-style homes near LaCenterra where the cable has to navigate multiple 90-degree elbows. Our fix: we pull the full cable assembly, inspect for heat fatigue at the coupler joints, and replace with OEM Nikro cable or a verified aftermarket equivalent - never a hardware-store substitute that voids the tool warranty.
- Nikro 860284 HEPA Vacuum Systems: The HEPA filter seal degrades faster in Katy’s humidity than in drier climates, especially when units are stored in garage corners between jobs. The symptom is fine dust bypass - the vacuum runs but post-cleaning particulate counts don’t drop. We replace the seal with Nikro-spec silicone gaskets and test negative-pressure hold at the plenum before we call the job done.
- Nikro 860515 Dryer Vent Cleaning System: The reverse skipper ball jams in lint-compacted transitions common in Katy’s 2015-2020 builds, where builders used corrugated flex duct behind walls. We scope the transition first with our camera, then switch to a manual rod-and-brush pass if the skipper can’t clear the initial blockage - documenting the restriction point so you see why the method changed.
- Nikro 862119 Gas-Powered Duct Cleaner: Carburetor varnish from ethanol-blend fuel sitting in Katy’s heat causes hard starts and surging RPM that damages the blower impeller. We drain and flush the fuel system, inspect the impeller for stress cracks, and only then run the unit. If the impeller’s out of spec, we source Nikro OEM - the aftermarket impellers we’ve tested run 8-12% out of balance, which transfers vibration to the ductwork.
- Nikro 860437 Negative Air Machine: The blower motor bearing fails prematurely when operators skip pre-filter changes and the motor pulls restricted airflow. In Katy, where pollen loads are heavy March through May, this happens faster. We check run hours against filter logs, replace the bearing with a sealed unit rated for the actual duty cycle, and note the filter interval on your job record so the next tech knows the machine’s history.
Our Nikro Air Duct Cleaning Process

- 1
Call and scope. You describe the system and symptoms. We schedule a visit and confirm the Nikro model if you know it - helps us load the right adapters and filter stock.
- 2
On-site inspection with photo baseline. We pull the camera before touching a single register. The before photo does the talking. Everything after that is just paperwork. You’ll see the debris layer, the restriction point, or the pest intrusion before we quote a dollar.
- 3
Written price, no exceptions. Haven Standard Clause 1: written price delivered before any work starts. If we find additional scope during cleaning, we stop, show you, and write a new price - no automatic add-ons.
- 4
Clean with Nikro-appropriate method. We match the tool to the duct material and contamination type - negative-pressure extraction for fiberglass-lined plenums, mechanical brushing for galvanized steel, hybrid approach for mixed systems. All equipment is professional-grade: Nikro, Rotobrush, Abatement Technologies, and others we name on request.
- 5
Post-cleaning verification. We re-scope every duct run and deliver the photo record as part of your standard job file. The after photos sit next to the befores in a single document.
- 6
Written guarantee filed. The 365-Day Done Right Promise goes on paper, not just a handshake. If the work isn’t right, we make it right.
Before
AfterWhat Nikro Air Duct Cleaning Costs in Katy
| Service | Typical Range | What Moves the Price |
|---|---|---|
| Residential Nikro duct cleaning, single system | $380 - $620 | Number of duct runs, plenum access difficulty, contamination level |
| Nikro dryer vent cleaning (standalone) | $180 - $290 | Length of run, number of 90-degree turns, roof vs. wall termination |
| Full system with video inspection | $520 - $780 | Camera scope of all runs, photo record delivery, HEPA vacuum requirement |
| Nikro equipment repair (cable, seal, bearing) | $140 - $340 labor + parts | OEM vs. quality aftermarket part, accessibility, parts availability |
We don’t price by square footage on your listing or by the number of vents. We price by the actual scope of work, measured and written before we start. Call (346) 666-7165 for an exact quote - estimates are free, and we publish our license number on every proposal.
Why Katy Homeowners Call CleanRun Air Duct Cleaning Katy for Nikro Work

We’ve cleaned ducts in Katy since 2013 - over 52,000 homes, every one with a written price first and a photo record at the end. Tomas Reyes, our owner, spent years running jobs in the older ranch homes near LaCenterra at Cinco Ranch, where the ductwork tells you more about a house’s history than the seller’s disclosure ever will. He built CleanRun around pulling the camera out before touching a single register.
Our technicians are background-checked, uniformed, and identified by name before arrival - Haven Standard Clause 3: Verified Crews. We also service Lennox, Trane, and Carrier systems, so if your Nikro equipment integrates with a mixed-brand HVAC setup, we don’t need to call in a second contractor. The 365-Day Done Right Promise is written on every job, not stated in marketing copy and forgotten. If you have a written estimate from another company, we’ll put our number next to it - free second opinion, no obligation.
FAQs
No. As an independent Nikro service provider, we use warranty-safe practices - OEM or verified-equivalent parts, no modification to factory specifications, and documentation of all work performed. We are not affiliated with or authorized by Nikro, but we service to manufacturer tolerances and provide you the service record for any future warranty claim.
Most residential jobs are completed in 3 to 5 hours, including setup, cleaning, and post-job photography. Larger homes in Elyson or Cross Creek Ranch with multiple HVAC zones may run longer. We schedule by the job, not by the hour - the crew stays until the scope is complete and verified. Call (346) 666-7165 to schedule.
Replace if the repair exceeds 60% of replacement cost, if parts are obsolete (some pre-2015 Nikro cables are no longer stocked), or if the unit has multiple failure points. We repair when the fix is straightforward, parts are available, and the unit has documented service history. We show you both options in writing with our recommendation - never a hard sell either direction.
You receive a Documented Photo Record of every duct run, before and after, as a standard deliverable on every CleanRun job. The photos are time-stamped and labeled by register location. If a run shows no meaningful change, we explain why - sometimes the duct is already clean, and we’ll tell you that rather than charge for unnecessary work.
Common wear parts - cables, seals, filters, skipper balls - are stocked by regional suppliers with next-day availability. Older or specialized components may take 3-5 business days. We verify parts availability before quoting a repair, so you’re not waiting on a truck that never shows. Call (346) 666-7165 and we’ll check stock against your model number.
Ready to schedule? Call CleanRun Air Duct Cleaning Katy at (346) 666-7165 for a free estimate. We’ll put the price in writing before any work starts, and you’ll see what your ducts actually look like before we touch a single register.
Written by Tomas Reyes, Owner, CleanRun Air Duct Cleaning Katy at CleanRun Air Duct Cleaning Katy, serving Katy and nearby areas.




Before
After
Before
After