Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterAbatement Technologies HVAC Cleaning in Katy: What to Know First
We provide independent Abatement Technologies HVAC cleaning in Katy, TX, with written pricing delivered before any work starts and a documented photo record of every component we touch. Most Abatement Technologies residential systems we service in the Katy area are completed in a single scheduled visit, with the full scope and price agreed in writing upfront - no per-vent add-ons, no post-work surprises. This page is for Abatement Technologies owners in Katy, Cinco Ranch, and the surrounding Energy Corridor who want to know what actually needs cleaning inside their air handler, why it matters for this specific brand, and what they’ll pay before a panel comes off. Call us at (346) 666-7165 for a free written estimate.
How Abatement Technologies Products Fail - and How We Fix Them
- BD2X Series blower motors cake with fine clay dust. Katy’s gumbo clay soil generates particulate that slips past standard filters and bonds to the BD2X blower wheel fins. We remove the entire blower assembly, clean each fin with compressed air and soft brushes, and photograph the delta. Running a dirty BD2X blower costs roughly 15-20% more in energy draw and strains the capacitor.
- Predator 750 air scrubber cells corrode at the contact points. The high-voltage ionizing wires in the Predator 750 series develop oxidation where they seat into the cell frame, especially in Katy homes with whole-home humidifiers set above 45%. We disassemble each cell, clean the contact points with a non-abrasive contact cleaner, and test output with a calibrated meter. Aftermarket cell replacements exist, but we source OEM cells for this component - the geometry is proprietary and third-party fits are inconsistent.
- PRED1200GX heat exchanger collectors trap construction debris in newer builds. In Katy subdivisions built 2018-2023 - think Cross Creek Ranch, Cane Island, and the stretch near LaCenterra - we’ve found PRED1200GX units with significant drywall dust and wood fiber packed above the primary heat exchanger. The builder’s HVAC startup rarely includes deep cleaning. We pull the collector box, negative-pressure extract the debris, and document the before condition. The before photo does the talking. Everything after that is just paperwork.
- Abatement Technologies HEPA-Care 500 series pre-filters load unevenly in homes with pets. Pet dander clusters on the intake side of the HEPA-Care 500 pre-filter, creating a bypass channel that lets unfiltered air reach the blower. We replace the pre-filter (OEM spec, not a cut-to-fit generic), clean the filter frame gasket, and check the differential pressure across the housing. The gasket hardens faster in Katy’s summer humidity; we flag it when it’s starting to go, not after it fails.
- Portable air scrubber blower belts glaze in unconditioned garage installations. Some Katy homeowners run Abatement Technologies portable units in garage workshops or detached structures. The belt-driven blowers on the PAS2400 and PAS5000 series develop a hard glaze from heat cycling, and the pulley alignment drifts. We replace the belt, realign the pulleys with a laser gauge, and note the corrected RPM in the job record. Quality aftermarket belts work fine here; we keep Dayco and Gates stock on the truck.
Our Abatement Technologies HVAC Cleaning Process
- 1
Written scope and price, upfront. Haven Standard Clause 1: we deliver a written price before any panel comes off. For Abatement Technologies systems, we verify the model and serial number to confirm parts availability and warranty status.
- 2
Photo documentation before contact. We photograph every component - blower housing, coil face, heat exchanger collector, filter rack - before touching anything. The customer sees what we saw.
- 3
Component-specific cleaning protocol. Evaporator coils get foamed with manufacturer-approved cleaner and rinsed with low-pressure water; blowers get removed and hand-cleaned; heat exchangers get brushed and vacuumed under negative pressure. No single method fits every Abatement Technologies component.
- 4
OEM vs. aftermarket parts decision, documented. We note in writing what we’re installing and why. For Abatement Technologies ionizing cells and proprietary gaskets, we default OEM. For belts, bearings, and standard hardware, we use quality aftermarket and state the brand.
- 5
Operational test and final photo record. We run the system through a full cycle, measure temperature rise and static pressure, and photograph the cleaned components. The photo record and written scope are delivered as standard.
- 6
365-Day Done Right Promise activation. The written guarantee goes into effect the moment we leave. If something’s not right, we make it right - no manager approval required.
BeforeAfterWhat Abatement Technologies HVAC Cleaning Costs in Katy
| Service | Typical Range | What Moves the Price |
|---|---|---|
| Blower assembly cleaning (BD2X, PAS series) | $240 - $380 | Removal difficulty, corrosion level, bearing condition |
| Evaporator coil cleaning | $320 - $490 | Accessibility (A-coil vs. slab), fin corrosion, treatment needed |
| Heat exchanger / collector cleaning | $280 - $420 | Debris volume, construction residue vs. standard dust |
| Air scrubber cell cleaning (Predator 750, HEPA-Care 500) | $180 - $290 | Cell count, contact point corrosion, OEM replacement needed |
| Full system cleaning (blower, coil, heat exchanger) | $680 - $950 | System size, component count, photo documentation scope |
These are whole-system prices, not per-vent come-ons that triple once the truck arrives. We also service Lennox, Trane, and Carrier systems with the same written-price protocol. Bring us any competitor’s written estimate - Haven Standard Clause 5, Free Second Opinion, no cost to compare.
Why Katy Homeowners Call CleanRun Air Duct Cleaning Katy for Abatement Technologies Work
We’ve cleaned Abatement Technologies equipment in Katy since 2013, including a run of older ranch-style homes near LaCenterra at Cinco Ranch where Tomas Reyes says the ductwork tells you more about a house’s history than the seller’s disclosure ever will. Our technicians are background-checked and uniformed under Haven Standard Clause 3: Verified Crews, and we publish our license number where customers can find it. Every job ends with a Documented Photo Record - not a promise of quality, but timestamped evidence of what was done. The 365-Day Done Right Promise is in writing, not a website footer. And when an Abatement Technologies part is back-ordered, we don’t guess; we tell you the lead time and your options, because Haven Standard Clause 1 means the price only applies to work we’re actually performing that day.
FAQs
No, professional cleaning by an independent service provider does not void your Abatement Technologies warranty, provided no components are altered or non-OEM parts are substituted where OEM is specified. We document every part used and every step taken, so if a warranty question ever arises, you have a complete service record. Call (346) 666-7165 if you’d like us to review your warranty terms before scheduling.
You receive a Documented Photo Record of every component - before and after - as a standard deliverable on every job. These are timestamped, geotagged images of your actual system, not stock photos. If we open your blower housing and find it clean enough that service isn’t warranted, we show you the photo and don’t charge for unnecessary work.
The $79-$129 coupon model typically covers a visual inspection and surface vacuuming of accessible registers, not component-level cleaning of the blower, coil, or heat exchanger. We price by the actual scope - blower removal, coil treatment, heat exchanger access - and put it in writing before starting. The cheap quote becomes expensive once the technician is in your home and “discovers” what was always going to be necessary.
If the unit is under 8 years old and the cells or blower are serviceable, cleaning and targeted part replacement is usually the better value. We assess cell output with a calibrated meter and check blower amp draw against spec; if both are within acceptable range, we clean and quote any needed parts. We don’t recommend replacement unless the chassis is damaged or parts are obsolete - and we’ll show you the documentation that supports either call.
Most Katy homes benefit from full system cleaning every 3-5 years, but homes with pets, recent construction, or high pollen exposure - common in the Cinco Ranch and Grand Lakes areas - may need it every 2-3 years. We don’t sell maintenance contracts or automatic rebooking; we check your system, show you what we find, and let the condition drive the timeline. Call (346) 666-7165 for a free written estimate and honest assessment of whether your system needs service now or can wait.
Ready to see what’s actually inside your Abatement Technologies system? Call (346) 666-7165. We’ll answer with a live person, schedule a visit at your convenience, and deliver a written price before any work begins. Estimates are free. The photo record is included. And the 365-Day Done Right Promise is in writing from day one.
Written by Tomas Reyes, Owner, CleanRun Air Duct Cleaning Katy at CleanRun Air Duct Cleaning Katy, serving Katy and nearby areas.