Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterAir Duct Cleaning in Mission Bend, TX
Whole-system HVAC cleaning in Mission Bend typically runs $380-$620 for a standard single-system home, with air quality and sanitizing treatments adding $180-$340 depending on contamination level. We’re CleanRun Duct Repair & Cleaning, and we dispatch crews to Mission Bend from our Houston office with Rotobrush and Abatement Technologies equipment, a written price agreed before any panel comes off, and a photo record of every duct run delivered when we leave. Call (346) 666-7165 for a free estimate.
Why Mission Bend Homes Are Different
Mission Bend developed as a master-planned community between the late 1970s and mid-1990s, which means most homes here still run original or first-replacement flex ductwork now 30-45 years old. These attic-mounted systems bake in temperatures that routinely exceed 150°F from May through September, accelerating insulation breakdown and sagging at joints.
The bigger issue is proximity to the Addicks Reservoir. During Hurricane Harvey in 2017, controlled releases and spillover flooded substantial portions of the community, driving moisture and microbial contamination into attic duct systems that many homeowners never fully remediated. We’ve found Harvey-era biofilm still active in duct runs that were dried but never properly treated. Houston’s 80-90% summer humidity keeps those conditions viable year-round, with AC running 9-10 months annually to push debris and mold spores through living spaces.
Early-1980s subdivisions here also used fiberglass duct board in place of flex, and after 40 years of heat cycling, that board delaminates and sheds glass fibers directly into the airstream. It’s a distinct Mission Bend problem we don’t see at this scale in newer Katy or Cinco Ranch builds.
Our Main Mission Bend Services
Most Mission Bend calls fall into three categories. Here’s what each involves locally:
Air Duct Cleaning in Mission Bend
We clean the full supply and return network with negative-pressure extraction, photographing every duct run before and after. In Mission Bend, we pay particular attention to flex duct joints that have sagged since installation and to flood-affected low points where debris collects. Air Duct Cleaning in Mission Bend includes the documented photo record as standard.
Dryer Vent Cleaning in Mission Bend
Lint accumulation in dryer vents is accelerated here by near-constant humidity, which causes lint to clump and stick where it would flow through in drier climates. We run a rotary brush through the full vent length and check exterior termination points, which in Mission Bend’s older homes are often original 4-inch plastic or foil transitions now degraded by attic heat. Dryer Vent Cleaning in Mission Bend includes airflow testing before we leave.
Duct Repair & Sealing in Mission Bend
Flex duct in Mission Bend’s 1975-1995 housing stock suffers from collapsed runs, disconnected boots, and deteriorated sealing tape. We replace damaged sections with new flex or rigid duct where appropriate, seal all joints with mastic, and pressure-test the system. Duct Repair & Sealing in Mission Bend jobs include before-and-after photos of each repair location.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterHVAC Cleaning in Mission Bend
Whole-system HVAC cleaning in Mission Bend addresses a specific regional problem: components that have cycled through 9-10 months of annual cooling since installation, often without intermediate service, in an environment where humidity keeps biofilm viable on coil and blower surfaces. Our crews use Rotobrush and Abatement Technologies equipment to clean what standard filter changes cannot reach. HVAC Cleaning from CleanRun includes the full documented photo record on every visit.
Evaporator Coil Cleaning
Signs you need it
Ice formation on the coil, reduced airflow from registers, or musty odor when the AC first cycles on indicate biofilm buildup that restricts heat transfer.
What it costs in Mission Bend
Evaporator coil cleaning in Mission Bend typically runs $180-$280 for accessible attic-mounted units.
How we do it
We remove the access panel, apply foaming cleaner to the coil fins, rinse with low-pressure water to avoid fin damage, and photograph the coil before and after.
Blower Cleaning
Signs you need it
Vibration or noise from the air handler, uneven airflow room-to-room, or dust streaking from supply registers points to debris imbalance on the blower wheel.
What it costs in Mission Bend
Blower assembly cleaning in Mission Bend ranges from $140-$220 depending on access and wheel condition.
How we do it
We remove the blower assembly, clean the wheel blades and housing with compressed air and solvent, balance the assembly on reinstallation, and document with photos.
What HVAC Cleaning Costs in Mission Bend
| Item | Typical range in Mission Bend |
|---|---|
| Evaporator coil cleaning | $180-$280 |
| Blower assembly cleaning | $140-$220 |
| Full system HVAC cleaning (coil + blower + air handler cabinet) | $380-$620 |
How do I know my HVAC system was actually cleaned?
Every CleanRun job includes a Documented Photo Record of each component before and after cleaning, delivered as part of your standard job record under Haven Standard Clause 2. Call (346) 666-7165 to schedule.
Why does my Mission Bend home smell musty when the AC turns on?
Musty startup odors in Mission Bend usually indicate microbial growth on the evaporator coil or in the condensate pan, common in homes with post-Harvey moisture history or 30+ year old duct systems. A coil cleaning and pan treatment typically resolves it.
Air Quality & Sanitizing in Mission Bend
Air quality and sanitizing in Mission Bend targets a documented regional problem: residual moisture and microbial contamination from 2017 reservoir flooding, combined with Houston’s year-round humidity, creates conditions where mold and bacteria colonize duct liner surfaces faster than in drier Texas metros. We treat these with EPA-registered products and install preventive equipment where appropriate. Air Quality & Sanitizing from CleanRun includes post-treatment verification photos.
Mold Treatment
Signs you need it
Visible discoloration on duct liner, musty odor persisting after standard cleaning, or respiratory symptoms that worsen when AC runs suggest active mold colonization.
What it costs in Mission Bend
Whole-system mold treatment in Mission Bend ranges from $280-$480 depending on contamination extent and accessibility.
How we do it
We apply an EPA-registered antimicrobial to all interior duct surfaces with a fogging applicator, allow proper dwell time, and verify with post-treatment photos.
UV Light Installation
Signs you need it
Recurring mold after treatment, chronic allergy symptoms, or a home with documented flood history and no prior UV protection indicates need for continuous sterilization.
What it costs in Mission Bend
UV-C light installation in Mission Bend runs $340-$520 including the lamp assembly and electrical connection to the air handler.
How we do it
We mount a Guardsman UV-C lamp in the supply plenum, wire to the air handler blower circuit for automatic operation, and provide replacement schedule documentation.
What Air Quality & Sanitizing Costs in Mission Bend
| Item | Typical range in Mission Bend |
|---|---|
| Whole-system mold treatment | $280-$480 |
| UV-C light installation | $340-$520 |
| Bacteria sanitizing (standalone treatment) | $180-$280 |
Is mold treatment safe for my family and pets?
We use EPA-registered antimicrobials formulated for HVAC applications, with no re-entry restrictions after the standard ventilation period; the product dries inert on duct surfaces. Call (346) 666-7165 for product specification sheets.
How long does UV light installation take?
Most UV-C installations in Mission Bend homes take 2-3 hours including mounting, wiring to the air handler, and operational testing; we schedule these as morning or afternoon appointments.
Brands We Service in Mission Bend
We stock parts and service equipment from Honeywell, Aprilaire, and Guardsman for Mission Bend homes, with most common filters, UV lamps, and media available on the truck. Turnaround on ordered specialty components is typically 2-3 business days through our Houston office. See our brands for the full roster.
Pricing for Air Duct Cleaning in Mission Bend, TX
| Service | Typical range in Mission Bend |
|---|---|
| Whole-system air duct cleaning | $380-$620 |
| Dryer vent cleaning | $120-$180 |
| Duct repair & sealing (per system) | $240-$480 |
| Evaporator coil cleaning | $180-$280 |
| Blower assembly cleaning | $140-$220 |
| Full HVAC cleaning (coil + blower + cabinet) | $380-$620 |
| Mold treatment (whole system) | $280-$480 |
| Bacteria sanitizing | $180-$280 |
| UV-C light installation | $340-$520 |
| Odor removal treatment | $160-$260 |
Prices in Mission Bend increase with system size, accessibility difficulty in tight attics, and contamination severity from flood history or long-deferred maintenance. Every job starts with a written price under Haven Standard Clause 1 before any work begins.
Neighborhoods We Serve in Mission Bend
CleanRun crews work across Mission Bend’s full residential area, from the original 1970s sections near the reservoir to the 1990s infill closer to West Bellfort. Response scheduling is coordinated from our Houston office with same-week availability typical.
- Mission Bend proper (original 1975-1985 development)
- Mission Glen
- Mission West
- Parkway Villages
- West Bellfort area infill
Service Area - Cities Near Mission Bend
We serve Mission Bend homeowners and the surrounding communities including Katy, TX, Cinco Ranch, TX, Brookshire, TX, and Pecan Grove, TX. All scheduling and dispatch run through our Houston office with crews assigned to each area based on daily routing.
Serving Mission Bend, TX - Our Local Coverage Area
We’re based in the Mission Bend area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Air Duct Cleaning in Mission Bend
Standard air duct cleaning and HVAC component cleaning do not require permits in unincorporated Harris County areas including Mission Bend; duct repair and sealing that modifies the distribution system may require inspection if it involves structural changes. We handle any necessary documentation as part of the job scope.
We typically schedule Mission Bend appointments within 3-5 business days; emergency situations involving complete system blockage or health-compromising mold exposure receive priority routing. Call (346) 666-7165 for current availability.
Most Mission Bend HOAs regulate exterior modifications like UV lamp visible through vents or new exterior penetrations, but do not restrict interior duct maintenance; we review any HOA notice requirements before work that affects building exterior appearance.
We cover all Mission Bend residential addresses within the master-planned community boundaries and adjacent infill; if you’re unsure whether your address falls in our Mission Bend zone, call (346) 666-7165 and we’ll confirm before booking.
Call CleanRun Duct Repair & Cleaning at (346) 666-7165 for a free written estimate on air duct cleaning, HVAC cleaning, or air quality services in Mission Bend. Every job includes a written price before work starts, a Documented Photo Record of every duct run, and our 365-Day Done Right Promise backed in writing.
What happens when you call
- 1A real person answersNo phone trees - talk to a local air duct cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Mission Bend Customers Say
"On time, professional, and explained what the readings meant without talking down to me."
- Warren E."The dryer vent was almost completely blocked with lint. They showed me the photograph and I understood immediately why the dryer had been running twice."
- Lucia M."Thorough job on the ducts and the dryer vent. Left the house clean and the paperwork was clear."
- Rafael I.